<?xml version="1.0" encoding="UTF-8"?><?xml-stylesheet type="text/xsl" href="static/style.xsl"?><OAI-PMH xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/ http://www.openarchives.org/OAI/2.0/OAI-PMH.xsd"><responseDate>2026-11-22T14:58:44Z</responseDate><request verb="GetRecord" identifier="oai:uwspace.uwaterloo.ca:10012/12403" metadataPrefix="dim">https://dspacemainprd01.lib.uwaterloo.ca/server/oai/request</request><GetRecord><record><header><identifier>oai:uwspace.uwaterloo.ca:10012/12403</identifier><datestamp>2025-03-26T23:32:19Z</datestamp><setSpec>com_10012_9900</setSpec><setSpec>com_10012_1</setSpec><setSpec>col_10012_9912</setSpec><setSpec>col_10012_6</setSpec></header><metadata><dim:dim xmlns:dim="http://www.dspace.org/xmlns/dspace/dim" xmlns:doc="http://www.lyncode.com/xoai" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.dspace.org/xmlns/dspace/dim http://www.dspace.org/schema/dim.xsd">
   <dim:field mdschema="dc" element="contributor" qualifier="advisor">Medley, John</dim:field>
   <dim:field mdschema="dc" element="contributor" qualifier="advisor">Parham, Rasoulinejad</dim:field>
   <dim:field mdschema="dc" element="contributor" qualifier="advisor">Yang, Victor</dim:field>
   <dim:field mdschema="dc" element="contributor" qualifier="author" authority="49b9043c-abf2-463c-ad2e-e9c2cd31edd1" confidence="600">Bodo, Andre</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="accessioned">2017-09-20T12:59:58Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="available">2017-09-20T12:59:58Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="issued">2017-09-20</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="submitted">2017-08-23</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="uri">http://hdl.handle.net/10012/12403</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="abstract" lang="en">As spine deformities scoliosis and kyphosis progress in severity, surgical treatment&#xd;
is often required. Implant rods are attached by bone screws to the spinal vertebrae to&#xd;
correct these deformities and stabilize the spine. It can be difficult to cut these rods to the&#xd;
ideal length before implantation and sometimes these rods are too long and must be cut&#xd;
in-situ. Also, when revision surgery is performed to replace a rod section, in-situ rod&#xd;
cutting must be performed. The rods are difficult to cut and only manual rod cutting tools&#xd;
are available. These rod cutters are physically demanding to use and difficult to position&#xd;
while avoiding any spurious with the exposed spine. There is a clear need for an improved&#xd;
in-situ rod cutter. Thus, the objective of this thesis is to develop a new and improved&#xd;
design for an in-situ rod cutter.&#xd;
Experimental work was done to show that shear cutting and bolt-cutting techniques&#xd;
produced the most desirable results for cutting spinal rods in-situ. The shear cutting&#xd;
techniques required slightly less force than bolt cutting techniques and produced a&#xd;
cleaner rod cut with less deformation. It was found that cutting force increased with the&#xd;
diameter of the spinal rod, regardless of the rod material. Constraints and criteria were&#xd;
established to guide the design of a new in-situ rod cutter. It was decided that any attempt&#xd;
at designing a new in-situ cutter must include a non-manual power source for operation.&#xd;
Two design alternatives, a shear cutting design and bolt-cutting design were presented&#xd;
and scored in an engineering design process. A shear cutter design was initially chosen&#xd;
and work was done to implement the shear cutter design. However, the prototype&#xd;
fractured in initial testing and the shear cutter design was abandoned. A bolt-cutter design&#xd;
was then developed and a 3D printed prototype was made to demonstrate the mechanism&#xd;
involved. Analysis was performed to estimate the mechanical advantage of the&#xd;
mechanism used to amplify the force applied by a pneumatic cylinder used as the power&#xd;
source. Further development was required to implement the bolt-cutting design but initial&#xd;
progress in this design project was achieved. It is recommended that stress analysis,&#xd;
prototyping and testing be done to move this design towards application in spinal surgery.</dim:field>
   <dim:field mdschema="dc" element="language" qualifier="iso" lang="en">en</dim:field>
   <dim:field mdschema="dc" element="publisher" lang="en">University of Waterloo</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en">Surgical Tool</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en">Rod Cutter</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en">Engineering Design</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en">Spinal Rod Cutter</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en">Mechanical Design</dim:field>
   <dim:field mdschema="dc" element="title" lang="en">Design of an In-situ Spinal Rod Cutter for Orthopaedic Surgeons</dim:field>
   <dim:field mdschema="dc" element="type" lang="en">Master Thesis</dim:field>
   <dim:field mdschema="dc" element="pending">false</dim:field>
   <dim:field mdschema="uws-etd" element="degree" qualifier="department" lang="en">Mechanical and Mechatronics Engineering</dim:field>
   <dim:field mdschema="uws-etd" element="degree" qualifier="discipline" lang="en">Mechanical Engineering</dim:field>
   <dim:field mdschema="uws-etd" element="degree" qualifier="grantor" lang="en">University of Waterloo</dim:field>
   <dim:field mdschema="uws-etd" element="degree" lang="en">Master of Applied Science</dim:field>
   <dim:field mdschema="uws" element="contributor" qualifier="advisor">Medley, John</dim:field>
   <dim:field mdschema="uws" element="contributor" qualifier="advisor">Parham, Rasoulinejad</dim:field>
   <dim:field mdschema="uws" element="contributor" qualifier="advisor">Yang, Victor</dim:field>
   <dim:field mdschema="uws" element="contributor" qualifier="affiliation1" lang="en">Faculty of Applied Health Sciences</dim:field>
   <dim:field mdschema="uws" element="published" qualifier="city" lang="en">Waterloo</dim:field>
   <dim:field mdschema="uws" element="published" qualifier="country" lang="en">Canada</dim:field>
   <dim:field mdschema="uws" element="published" qualifier="province" lang="en">Ontario</dim:field>
   <dim:field mdschema="uws" element="typeOfResource" lang="en">Text</dim:field>
   <dim:field mdschema="uws" element="peerReviewStatus" lang="en">Unreviewed</dim:field>
   <dim:field mdschema="uws" element="scholarLevel" lang="en">Graduate</dim:field>
   <dim:field mdschema="others" element="access-status">open.access</dim:field>
</dim:dim>
</metadata></record></GetRecord></OAI-PMH>