<?xml version="1.0" encoding="UTF-8"?><?xml-stylesheet type="text/xsl" href="static/style.xsl"?><OAI-PMH xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/ http://www.openarchives.org/OAI/2.0/OAI-PMH.xsd"><responseDate>2026-11-22T21:51:43Z</responseDate><request verb="GetRecord" identifier="oai:uwspace.uwaterloo.ca:10012/14032" metadataPrefix="dim">https://dspacemainprd01.lib.uwaterloo.ca/server/oai/request</request><GetRecord><record><header><identifier>oai:uwspace.uwaterloo.ca:10012/14032</identifier><datestamp>2025-03-26T23:35:53Z</datestamp><setSpec>com_10012_9900</setSpec><setSpec>com_10012_1</setSpec><setSpec>col_10012_9912</setSpec><setSpec>col_10012_6</setSpec></header><metadata><dim:dim xmlns:dim="http://www.dspace.org/xmlns/dspace/dim" xmlns:doc="http://www.lyncode.com/xoai" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.dspace.org/xmlns/dspace/dim http://www.dspace.org/schema/dim.xsd">
   <dim:field mdschema="dc" element="contributor" qualifier="advisor">Lambert, Steve</dim:field>
   <dim:field mdschema="dc" element="contributor" qualifier="author" authority="5ca696be-e314-4bc9-bf58-d4c31ae0fdb7" confidence="600">Abesin Kodippili, Tharindu</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="accessioned">2018-10-22T14:26:18Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="available">2019-10-18T04:50:16Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="issued">2018-10-22</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="submitted">2018-10-18</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="uri">http://hdl.handle.net/10012/14032</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="abstract" lang="en">In an effort to improve fuel economy standards in the automotive industry, the use of lightweight materials to manufacture fatigue-critical components is investigated by a large group at the University of Waterloo. Prior research into the development of a front lower control arm made of a magnesium alloy has produced a design approximately 35% lighter in mass to its cast aluminum benchmark. A hot forging tool was designed and developed to produce forgings of this control arm design in a single-hit operation. The as-forged component will have has a shape of a near-complete arm with excess flash, requiring subsequent trimming and finishing operations.  The tool was designed for a low-volume production rate and batch size – tool wear was neglected – at a maximum operational temperature of 400°C and a loading capacity of 1600 tonnes.  The tool design was successfully validated using thermal and mechanical simulations. Forging materials and conditions were initially chosen based on literature. At a later time, an analytical material selection model or objective function was developed by other members involved in the project. As part of a secondary study, the structural and fatigue behaviour of the control arm forged at conditions selected using the analytical model were evaluated to gauge its effectiveness as a selection tool. Results were inconclusive due to lack of complete material models. However, through simulation, it was shown that a control arm forged at 250℃ using an extruded AZ80 alloy will meet OEM performance requirements.</dim:field>
   <dim:field mdschema="dc" element="language" qualifier="iso" lang="en">en</dim:field>
   <dim:field mdschema="dc" element="publisher" lang="en">University of Waterloo</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en">Hot Forging Tool Design</dim:field>
   <dim:field mdschema="dc" element="title" lang="en">Hot Forging Tool Design for a Magnesium Alloy Front Lower Control Arm</dim:field>
   <dim:field mdschema="dc" element="type" lang="en">Master Thesis</dim:field>
   <dim:field mdschema="dc" element="pending">false</dim:field>
   <dim:field mdschema="uws-etd" element="degree" qualifier="department" lang="en">Mechanical and Mechatronics Engineering</dim:field>
   <dim:field mdschema="uws-etd" element="degree" qualifier="discipline" lang="en">Mechanical Engineering</dim:field>
   <dim:field mdschema="uws-etd" element="degree" qualifier="grantor" lang="en">University of Waterloo</dim:field>
   <dim:field mdschema="uws-etd" element="degree" lang="en">Master of Applied Science</dim:field>
   <dim:field mdschema="uws-etd" element="embargo" qualifier="terms">1 year</dim:field>
   <dim:field mdschema="uws" element="contributor" qualifier="advisor">Lambert, Steve</dim:field>
   <dim:field mdschema="uws" element="contributor" qualifier="affiliation1" lang="en">Faculty of Engineering</dim:field>
   <dim:field mdschema="uws" element="published" qualifier="city" lang="en">Waterloo</dim:field>
   <dim:field mdschema="uws" element="published" qualifier="country" lang="en">Canada</dim:field>
   <dim:field mdschema="uws" element="published" qualifier="province" lang="en">Ontario</dim:field>
   <dim:field mdschema="uws" element="typeOfResource" lang="en">Text</dim:field>
   <dim:field mdschema="uws" element="peerReviewStatus" lang="en">Unreviewed</dim:field>
   <dim:field mdschema="uws" element="scholarLevel" lang="en">Graduate</dim:field>
   <dim:field mdschema="others" element="access-status">open.access</dim:field>
</dim:dim>
</metadata></record></GetRecord></OAI-PMH>