<?xml version="1.0" encoding="UTF-8"?><?xml-stylesheet type="text/xsl" href="static/style.xsl"?><OAI-PMH xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/ http://www.openarchives.org/OAI/2.0/OAI-PMH.xsd"><responseDate>2026-11-22T19:59:15Z</responseDate><request verb="GetRecord" identifier="oai:uwspace.uwaterloo.ca:10012/15415" metadataPrefix="dim">https://dspacemainprd01.lib.uwaterloo.ca/server/oai/request</request><GetRecord><record><header><identifier>oai:uwspace.uwaterloo.ca:10012/15415</identifier><datestamp>2025-03-26T23:32:17Z</datestamp><setSpec>com_10012_9900</setSpec><setSpec>com_10012_1</setSpec><setSpec>col_10012_9912</setSpec><setSpec>col_10012_6</setSpec></header><metadata><dim:dim xmlns:dim="http://www.dspace.org/xmlns/dspace/dim" xmlns:doc="http://www.lyncode.com/xoai" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.dspace.org/xmlns/dspace/dim http://www.dspace.org/schema/dim.xsd">
   <dim:field mdschema="dc" element="contributor" qualifier="advisor">Worswick, Michael</dim:field>
   <dim:field mdschema="dc" element="contributor" qualifier="advisor">Esmaeili, Shahrzad</dim:field>
   <dim:field mdschema="dc" element="contributor" qualifier="author" authority="41a68268-c1c3-4ef5-a7e5-e7df619c4a81" confidence="600">Omer, Kaab</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="accessioned">2020-01-07T15:08:20Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="available">2020-01-07T15:08:20Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="issued">2020-01-07</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="submitted">2019-12-20</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="uri">http://hdl.handle.net/10012/15415</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="abstract" lang="en">Hot stamping, or die quenching (DQ), of 7000-series aluminum alloys is a metal forming process &#xd;
in which a blank is heated (solutionized) and then quenched and formed in cold tooling. The &#xd;
formed part is then subjected to an artificial aging treatment to reach a targeted final strength &#xd;
(temper). The work presented herein addresses several aspects of the die quenching process &#xd;
chain for two 7000-series aluminum sheet alloys, AA7075 and a developmental alloy referred to &#xd;
as AA7xxx. The thesis addresses: (i) identification of forming process and artificial aging &#xd;
parameters needed to achieve high strength structural properties within an automotive die &#xd;
quenching paradigm; (ii) characterization of high temperature constitutive and heat transfer &#xd;
properties required to accurately simulate the die quenching process; and (iii) development of a &#xd;
model of the work hardening response of die quenched AA7075 as a function of the extent of &#xd;
artificial aging.&#xd;
The effect of the solutionizing duration, the transfer time between the furnace and die, and the in-&#xd;
die quench rate on the subsequent aging response were examined for both alloys. Experiments &#xd;
revealed that both alloys require a solutionizing time of 8 min at 470 °C. For AA7075, a transfer &#xd;
time of up to 6 s (furnace to die) was deemed to be acceptable since this time duration does not &#xd;
appear to result in premature precipitation. For AA7xxx, a transfer time of up to 15 s is &#xd;
acceptable. AA7075 required a minimum quench rate of 56 °C/s, whereas AA7xxx requires only&#xd;
27 °C/s. Variations in aging treatments following die quenching were also considered in order to &#xd;
obtain desirable yield and ultimate tensile strength properties while accounting for the paint bake &#xd;
cycle (PBC) and its effect on artificial aging response. It was determined that AA7075 could &#xd;
achieve strength properties similar to those a T6 temper if it was aged for 8h at 121 °C followed by a PBC (30 min at 177 °C). AA7xxx could achieve T6-like properties if aged for 3h at 100 °C&#xd;
followed by a PBC and T76-like properties if aged for 4h at 100 °C, followed by a PBC.&#xd;
A detailed characterization of the constitutive behaviour and heat transfer characteristics of these &#xd;
alloys under DQ conditions was performed. Of particular note, this characterization was &#xd;
performed at elevated temperatures while the material was in a solutionized condition. The &#xd;
acquired properties consisted of: (i) the temperature and strain rate dependent stress-strain &#xd;
properties; (ii) the yield surface, and (iii) the heat transfer coefficient (HTC) of both alloys. The &#xd;
stress-strain properties were obtained by subjecting tensile specimens to a temperature-time &#xd;
cycle resembling the DQ process. A novel technique was devised in which the cross-sectional &#xd;
area of the tensile specimens were measured using stereoscopic digital image correlation (DIC)&#xd;
technique. A Barlat Yld2000 yield surface was calibrated using anisotropic properties obtained &#xd;
from shear and tensile tests. The HTC was obtained as a function of contact pressure by &#xd;
performing a series of instrumented quenching experiments in which the temperatures of the &#xd;
blank and die were measured as a function of time. These temperature-time curves were &#xd;
processed using Fourier’s law and Newton’s cooling law to calculate HTC.&#xd;
The acquired elevated temperature constitutive properties and heat transfer coefficients were &#xd;
input to a finite element model of die quenched deep drawn cups. The load-displacement and &#xd;
earring profile results from the experiments were shown to match well with the predicted results &#xd;
from the model.&#xd;
The final step in the DQ process chain was also considered in terms of the final or in-service &#xd;
mechanical properties of die quenched and artificially aged components. A micro-mechanics &#xd;
based model was developed to predict the stress-strain response and work hardening rate of AA7075 as a function of the aging treatment applied. The micromechanics model accounts for &#xd;
precipitate-dislocation interaction during deformation following aging and was validated for a &#xd;
range of multi-step aging treatments. Tensile tests were performed considering tempers ranging &#xd;
from as-quenched up to the peak aged condition, and the model was shown to accurately predict &#xd;
flow stress over the entire range of aging treatments considered.</dim:field>
   <dim:field mdschema="dc" element="language" qualifier="iso" lang="en">en</dim:field>
   <dim:field mdschema="dc" element="publisher" lang="en">University of Waterloo</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en">Hot stamping</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en">7000 series</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en">HTC</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en">Constitutive modelling</dim:field>
   <dim:field mdschema="dc" element="title" lang="en">On the Response of 7000-Series Alloys to Hot Stamping</dim:field>
   <dim:field mdschema="dc" element="type" lang="en">Doctoral Thesis</dim:field>
   <dim:field mdschema="dc" element="pending">false</dim:field>
   <dim:field mdschema="uws-etd" element="degree" qualifier="department" lang="en">Mechanical and Mechatronics Engineering</dim:field>
   <dim:field mdschema="uws-etd" element="degree" qualifier="discipline" lang="en">Mechanical Engineering</dim:field>
   <dim:field mdschema="uws-etd" element="degree" qualifier="grantor" lang="en">University of Waterloo</dim:field>
   <dim:field mdschema="uws-etd" element="degree" lang="en">Doctor of Philosophy</dim:field>
   <dim:field mdschema="uws" element="contributor" qualifier="advisor">Worswick, Michael</dim:field>
   <dim:field mdschema="uws" element="contributor" qualifier="advisor">Esmaeili, Shahrzad</dim:field>
   <dim:field mdschema="uws" element="contributor" qualifier="affiliation1" lang="en">Faculty of Engineering</dim:field>
   <dim:field mdschema="uws" element="published" qualifier="city" lang="en">Waterloo</dim:field>
   <dim:field mdschema="uws" element="published" qualifier="country" lang="en">Canada</dim:field>
   <dim:field mdschema="uws" element="published" qualifier="province" lang="en">Ontario</dim:field>
   <dim:field mdschema="uws" element="typeOfResource" lang="en">Text</dim:field>
   <dim:field mdschema="uws" element="peerReviewStatus" lang="en">Unreviewed</dim:field>
   <dim:field mdschema="uws" element="scholarLevel" lang="en">Graduate</dim:field>
   <dim:field mdschema="others" element="access-status">open.access</dim:field>
</dim:dim>
</metadata></record></GetRecord></OAI-PMH>