<?xml version="1.0" encoding="UTF-8"?><?xml-stylesheet type="text/xsl" href="static/style.xsl"?><OAI-PMH xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/ http://www.openarchives.org/OAI/2.0/OAI-PMH.xsd"><responseDate>2026-11-22T17:37:04Z</responseDate><request verb="GetRecord" identifier="oai:uwspace.uwaterloo.ca:10012/18944" metadataPrefix="dim">https://dspacemainprd01.lib.uwaterloo.ca/server/oai/request</request><GetRecord><record><header><identifier>oai:uwspace.uwaterloo.ca:10012/18944</identifier><datestamp>2025-03-26T23:33:56Z</datestamp><setSpec>com_10012_9900</setSpec><setSpec>com_10012_1</setSpec><setSpec>col_10012_9906</setSpec><setSpec>col_10012_6</setSpec></header><metadata><dim:dim xmlns:dim="http://www.dspace.org/xmlns/dspace/dim" xmlns:doc="http://www.lyncode.com/xoai" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.dspace.org/xmlns/dspace/dim http://www.dspace.org/schema/dim.xsd">
   <dim:field mdschema="dc" element="contributor" qualifier="advisor">Younes, Taha</dim:field>
   <dim:field mdschema="dc" element="contributor" qualifier="author" authority="b22c502f-febb-4b3c-bf0e-e971d11e754e" confidence="600">Younes, Taha</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="accessioned">2022-12-06T13:53:07Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="available">2022-12-06T13:53:07Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="issued">2022-12-06</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="submitted">2022-06-15</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="uri">http://hdl.handle.net/10012/18944</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="abstract" lang="en">In place recycling of existing asphalt pavement is a rehabilitation strategy, which the Ministry of&#xd;
Transportation Ontario (MTO) adopted decades ago. Asphalt emulsion is the most common type&#xd;
of bitumen stabilizing agent incorporated into recycled mixtures in Ontario. Active fillers such as&#xd;
Portland cement, hydrated lime and fly ash can be added to a volume fraction of less than 1% to&#xd;
the recycled mixtures to improve dispersion of the bitumen in the mixtures and to increase the&#xd;
stiffness of the mixtures and the rate of strength gain. This study is a project of the Centre for&#xd;
Pavement and Transportation Technology (CPATT) laboratory at the University of Waterloo in&#xd;
partnership with the MTO and various industry partners in Ontario. Cationic Slow Setting&#xd;
Emulsion (CSS-1H) and Anionic High Float Emulsion (HF-150) emulsions were mixed with&#xd;
typical Reclaimed Asphalt Pavement materials (RAP), which are pulverized (HL8 and HL3) in the&#xd;
CPATT laboratory at the University of Waterloo. To improve the dispersion of the bitumen in the&#xd;
mixes and to increase the stiffness of the mixtures and the rate of strength gain, different&#xd;
percentages of Portland cement (0%, 0.5%, 1.5% and 3%) were added to the mixes. Four mixes&#xd;
were prepared. Mixture 1 (M1) was developed using the cationic slow setting emulsion-CSS-1H&#xd;
that was mixed with a pulverized HL8 RAP material; for the second mixture (M2), the Anionic&#xd;
High Float Emulsion (HF-150) was mixed with a pulverized HL8 RAP material. However, for the&#xd;
third mixture (M3), the cationic slow setting emulsion-CSS-1H was mixed with pulverized HL3&#xd;
RAP material, and for the fourth mixture (M4), the Anionic High Float Emulsion (HF-150) was&#xd;
mixed with pulverized HL3 RAP material. These mixes were tested and evaluated using Indirect&#xd;
Tensile, Dynamic Modulus, Fatigue and Thermal Stress Restrained Specimen Tests. Furthermore,&#xd;
the moisture susceptibility was controlled by conditioning the specimens for 24 hours at 25 degrees&#xd;
Celsius before testing. The results showed that increasing the percentage of Portland cement led&#xd;
to an increase in strength. For the Cold In-Place Recycled Asphalt (CIR) mixes, the addition of&#xd;
Portland cement increased the stiffness. For M1 and M2 mixes, there was a tradeoff relationship&#xd;
between the stiffness and fatigue life. Adding amounts of Portland cement between 0.5% and 1.5%&#xd;
to these mixes increased the stiffness significantly with only a small reduction in fatigue life. As&#xd;
Portland cement was added to M3 and M4 mixtures, the stiffness increased until the cement content&#xd;
reached 1.5%. Additions above 1.5% did not produce a noticeable increase in stiffness. Also, the&#xd;
tensile strength and moisture resistance improved significantly with the addition of Portland&#xd;
v&#xd;
cement. However, the low-temperature fracture properties of the mixtures deteriorated due to&#xd;
increased brittleness and the development of shrinkage cracks that caused the mixtures to fail at&#xd;
higher temperatures and lower fracture stresses. In all cases, adding amounts of Portland cement&#xd;
between 0.5% and 1.5% enhanced the stiffness, tensile strength, and moisture&#xd;
susceptibility resistance of the mixes with only a small reduction in fatigue life. Finally, a classic&#xd;
Maxwell model, a rheological model comprised of a spring and dashpot in a series of materials,&#xd;
was used to simulate either the stress-strain behaviour of the material or the force-deformation&#xd;
relationship of a test specimen. The model, once calibrated using the stress-strain data from a single&#xd;
specimen fatigue test, accurately described the stress-strain histories for all tests. Features&#xd;
described by the model included the stress-strain hysteresis loop shape, the relaxation of mean&#xd;
stress to zero under controlled strain cycling and the decrease of stress range with cyclic straining.&#xd;
The latter gave accurate predictions of the reduction of the initial stiffness to one-half its initial&#xd;
value, which was used as the definition of failure.</dim:field>
   <dim:field mdschema="dc" element="language" qualifier="iso" lang="en">en</dim:field>
   <dim:field mdschema="dc" element="publisher" lang="en">University of Waterloo</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en">Portland Cement</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en">Cold In Place Recycled</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en">Emulsion</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en">Fatigue</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en">Stiffness</dim:field>
   <dim:field mdschema="dc" element="title" lang="en">The Impact of Portland Cement on the Performance of Cold In-Place Recycled Pavement</dim:field>
   <dim:field mdschema="dc" element="type" lang="en">Doctoral Thesis</dim:field>
   <dim:field mdschema="dc" element="pending">false</dim:field>
   <dim:field mdschema="uws-etd" element="degree" qualifier="department" lang="en">Civil and Environmental Engineering</dim:field>
   <dim:field mdschema="uws-etd" element="degree" qualifier="discipline" lang="en">Civil Engineering</dim:field>
   <dim:field mdschema="uws-etd" element="degree" qualifier="grantor" lang="en">University of Waterloo</dim:field>
   <dim:field mdschema="uws-etd" element="degree" lang="en">Doctor of Philosophy</dim:field>
   <dim:field mdschema="uws-etd" element="embargo" qualifier="terms" lang="en">0</dim:field>
   <dim:field mdschema="uws" element="contributor" qualifier="advisor">Younes, Taha</dim:field>
   <dim:field mdschema="uws" element="contributor" qualifier="affiliation1" lang="en">Faculty of Engineering</dim:field>
   <dim:field mdschema="uws" element="published" qualifier="city" lang="en">Waterloo</dim:field>
   <dim:field mdschema="uws" element="published" qualifier="country" lang="en">Canada</dim:field>
   <dim:field mdschema="uws" element="published" qualifier="province" lang="en">Ontario</dim:field>
   <dim:field mdschema="uws" element="typeOfResource" lang="en">Text</dim:field>
   <dim:field mdschema="uws" element="peerReviewStatus" lang="en">Unreviewed</dim:field>
   <dim:field mdschema="uws" element="scholarLevel" lang="en">Graduate</dim:field>
   <dim:field mdschema="others" element="access-status">open.access</dim:field>
</dim:dim>
</metadata></record></GetRecord></OAI-PMH>