<?xml version="1.0" encoding="UTF-8"?><?xml-stylesheet type="text/xsl" href="static/style.xsl"?><OAI-PMH xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/ http://www.openarchives.org/OAI/2.0/OAI-PMH.xsd"><responseDate>2026-11-22T00:56:31Z</responseDate><request verb="GetRecord" identifier="oai:uwspace.uwaterloo.ca:10012/3136" metadataPrefix="dim">https://dspacemainprd01.lib.uwaterloo.ca/server/oai/request</request><GetRecord><record><header><identifier>oai:uwspace.uwaterloo.ca:10012/3136</identifier><datestamp>2017-03-21T20:05:39Z</datestamp><setSpec>com_10012_9900</setSpec><setSpec>com_10012_1</setSpec><setSpec>col_10012_9912</setSpec><setSpec>col_10012_6</setSpec></header><metadata><dim:dim xmlns:dim="http://www.dspace.org/xmlns/dspace/dim" xmlns:doc="http://www.lyncode.com/xoai" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.dspace.org/xmlns/dspace/dim http://www.dspace.org/schema/dim.xsd">
   <dim:field mdschema="dc" element="contributor" qualifier="author" authority="67263403-a5f0-43d0-9a9c-cc23d9446e40" confidence="600">Cluff, Daniel Robert Andrew</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="accessioned">2007-07-27T18:03:56Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="available">2007-07-27T18:03:56Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="issued">2007-07-27T18:03:56Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="submitted">2007</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="uri">http://hdl.handle.net/10012/3136</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="abstract" lang="en">A novel aluminum foam-polymer hybrid material was developed by filling a 10 pore per inch (0.39&#xd;
pores per millimeter), 7 % relative density Duocel® open-cell aluminum foam with a thermoplastic&#xd;
polymer of trade name Elvax®. The hybrid was developed to be completely recyclable and easy to&#xd;
process. The foam was solution treated, air quenched and then aged for various times at 180˚C and&#xd;
220˚C to assess the effect of heat treatment on the mechanical properties of the foam and to choose&#xd;
the appropriate aging condition for the hybrid fabrication. An increase in yield strength, plateau&#xd;
height and energy absorbed was observed in peak-aged aluminum foam in comparison with underaged&#xd;
aluminum foam. Following this result, aluminum foam was utilized either at the peak-aged&#xd;
condition of 4 hrs at 220˚C or in the as-fabricated condition to fabricate the hybrid material.&#xd;
Mechanical properties of the aluminum foam-polymer hybrid and the parent materials were assed&#xd;
through uniaxial compression testing at static ( de/dt = 0.008s-1 ) and dynamic ( de/dt = 100s-1 ) loading&#xd;
rates. The damping characteristics of aluminum foam-polymer hybrid and aluminum foam were also&#xd;
obtained by compression-compression cyclic testing at 5 Hz. No benefit to the mechanical properties&#xd;
of aluminum foam or the aluminum foam-polymer hybrid was obtained by artificial aging to peakaged&#xd;
condition compared to as-fabricated foam. Although energy absorption efficiency is not&#xd;
enhanced by hybid fabrication, the aluminum foam-polymer hybrid displayed enhanced yield stress,&#xd;
densification stress and total energy absorbed over the parent materials. The higher densification&#xd;
stress was indicative that the hybrid was a better energy absorbing material at higher stress than the&#xd;
aluminum foam. The aluminum foam was found to be strain rate independent unlike the hybrid where&#xd;
the visco-elasticity of the polymer component contributed to its strain rate dependence. The damping&#xd;
properties of both aluminum foam and the aluminum foam-polymer hybrid materials were found to&#xd;
be amplitude dependant with the hybrid material displaying superior damping capability.</dim:field>
   <dim:field mdschema="dc" element="format" qualifier="extent">2308342 bytes</dim:field>
   <dim:field mdschema="dc" element="format" qualifier="mimetype">application/pdf</dim:field>
   <dim:field mdschema="dc" element="language" qualifier="iso" lang="en">en</dim:field>
   <dim:field mdschema="dc" element="publisher" lang="en">University of Waterloo</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en">Aluminum Foam</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en">Dynamic Compression Testing</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en">Energy Absorption</dim:field>
   <dim:field mdschema="dc" element="subject" qualifier="program" lang="en">Mechanical Engineering</dim:field>
   <dim:field mdschema="dc" element="title" lang="en">Fabrication of a New Model Hybrid Material and Comparative Studies of its Mechanical Properties</dim:field>
   <dim:field mdschema="dc" element="type" lang="en">Master Thesis</dim:field>
   <dim:field mdschema="dc" element="pending" lang="en">false</dim:field>
   <dim:field mdschema="uws-etd" element="degree" qualifier="department" lang="en">Mechanical and Mechatronics Engineering</dim:field>
   <dim:field mdschema="uws-etd" element="degree" lang="en">Master of Applied Science</dim:field>
   <dim:field mdschema="uws" element="typeOfResource" lang="en">Text</dim:field>
   <dim:field mdschema="uws" element="peerReviewStatus" lang="en">Unreviewed</dim:field>
   <dim:field mdschema="uws" element="scholarLevel" lang="en">Graduate</dim:field>
   <dim:field mdschema="others" element="access-status">open.access</dim:field>
</dim:dim>
</metadata></record></GetRecord></OAI-PMH>