<?xml version="1.0" encoding="UTF-8"?><?xml-stylesheet type="text/xsl" href="static/style.xsl"?><OAI-PMH xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/ http://www.openarchives.org/OAI/2.0/OAI-PMH.xsd"><responseDate>2026-11-22T13:16:38Z</responseDate><request verb="GetRecord" identifier="oai:uwspace.uwaterloo.ca:10012/3732" metadataPrefix="dim">https://dspacemainprd01.lib.uwaterloo.ca/server/oai/request</request><GetRecord><record><header><identifier>oai:uwspace.uwaterloo.ca:10012/3732</identifier><datestamp>2019-04-03T03:04:50Z</datestamp><setSpec>com_10012_9900</setSpec><setSpec>com_10012_1</setSpec><setSpec>col_10012_9906</setSpec><setSpec>col_10012_6</setSpec></header><metadata><dim:dim xmlns:dim="http://www.dspace.org/xmlns/dspace/dim" xmlns:doc="http://www.lyncode.com/xoai" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.dspace.org/xmlns/dspace/dim http://www.dspace.org/schema/dim.xsd">
   <dim:field mdschema="dc" element="contributor" qualifier="author" authority="1db4d778-d49b-475b-b98d-cf434d234a70" confidence="600">Lewis, Albert Victor</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="accessioned">2008-05-22T15:56:43Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="available">2008-05-22T15:56:43Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="issued">2008-05-22T15:56:43Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="submitted">2008</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="uri">http://hdl.handle.net/10012/3732</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="abstract" lang="en">Cold-formed steel structural members are used extensively in building construction, with a common application being wind load bearing steel studs. The studs frame into horizontal steel track members at the top and bottom of the wall assembly, with the stud-to-track connection typically being made with self-drilling screws or welds. The wall studs are designed to carry lateral loads only and must be checked for web crippling at the end reactions. While a design expression currently exists for the single stud-to-track connection, there is no similar design expression for multiple jamb stud members. &#xd;
An experimental investigation was carried out, consisting of 94 jamb stud assembly tests subjected to end-one-flange loading. The stud-to-track connections consisted of single C-section studs located at the end of a track simulating a door opening, and a built-up jamb made up of two studs simulating framing at either a window or door opening.  The members were attached to the track with self-drilling screws. The research objective was to determine the failure modes and develop a design expression for these structural assemblies.&#xd;
The scope of the experimental investigation covered the following range of parameters:&#xd;
i)	Stud and track depths of 92 mm and 152 mm;&#xd;
ii)	Stud and track thickness (0.84 mm, 1.12 mm, 1.52 mm and 1.91 mm);&#xd;
iii)	Configuration of jamb studs (back-to-back, toe-to-toe and single);&#xd;
iv)	Location of jamb studs in the track (interior and end);&#xd;
v)	Screw size (#8, #10 and #12);&#xd;
vi)	Screw location (both flanges and single flange). &#xd;
Based on the findings of this investigation, design expressions are proposed to predict the capacity of this connection for two limit states: web crippling of the jamb stud; and, punch-through of the track. The web crippling design expression was taken from the North American Specification for the Design of Cold-Formed Steel Structural Members [AISI 2007a; CSA 2007] with new coefficients developed from the test data of the jamb stud-to-track assemblies. A new design expression is also proposed for the track punch-through failure mode, which differs from the approach currently used in the North American Standard for Cold-Formed Steel Framing – Wall Stud Design [AISI 2007b]. A proposal is also recommended to revise the wording in the North American Standard for Cold-Formed Steel Framing – Wall Stud Design [AISI 2007b] to include provisions for the design of jamb studs based on the results of this research.</dim:field>
   <dim:field mdschema="dc" element="language" qualifier="iso" lang="en">en</dim:field>
   <dim:field mdschema="dc" element="publisher" lang="en">University of Waterloo</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en">Cold-Formed Steel</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en">built-up jambs</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en">connections</dim:field>
   <dim:field mdschema="dc" element="subject" qualifier="program" lang="en">Civil Engineering</dim:field>
   <dim:field mdschema="dc" element="title" lang="en">Strength of Cold-Formed Steel Jamb Stud-To-Track Connections</dim:field>
   <dim:field mdschema="dc" element="type" lang="en">Master Thesis</dim:field>
   <dim:field mdschema="dc" element="pending" lang="en">false</dim:field>
   <dim:field mdschema="uws-etd" element="degree" qualifier="department" lang="en">Civil and Environmental Engineering</dim:field>
   <dim:field mdschema="uws-etd" element="degree" lang="en">Master of Applied Science</dim:field>
   <dim:field mdschema="uws" element="typeOfResource" lang="en">Text</dim:field>
   <dim:field mdschema="uws" element="peerReviewStatus" lang="en">Unreviewed</dim:field>
   <dim:field mdschema="uws" element="scholarLevel" lang="en">Graduate</dim:field>
   <dim:field mdschema="others" element="access-status">open.access</dim:field>
</dim:dim>
</metadata></record></GetRecord></OAI-PMH>