<?xml version="1.0" encoding="UTF-8"?><?xml-stylesheet type="text/xsl" href="static/style.xsl"?><OAI-PMH xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/ http://www.openarchives.org/OAI/2.0/OAI-PMH.xsd"><responseDate>2026-11-22T13:12:45Z</responseDate><request verb="GetRecord" identifier="oai:uwspace.uwaterloo.ca:10012/4176" metadataPrefix="dim">https://dspacemainprd01.lib.uwaterloo.ca/server/oai/request</request><GetRecord><record><header><identifier>oai:uwspace.uwaterloo.ca:10012/4176</identifier><datestamp>2019-04-03T02:52:01Z</datestamp><setSpec>com_10012_9900</setSpec><setSpec>com_10012_1</setSpec><setSpec>col_10012_9912</setSpec><setSpec>col_10012_6</setSpec></header><metadata><dim:dim xmlns:dim="http://www.dspace.org/xmlns/dspace/dim" xmlns:doc="http://www.lyncode.com/xoai" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.dspace.org/xmlns/dspace/dim http://www.dspace.org/schema/dim.xsd">
   <dim:field mdschema="dc" element="contributor" qualifier="author" authority="91f13e7e-db6e-4bb6-ab6b-2114a5c14964" confidence="600">Clark, Darren</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="accessioned">2009-01-13T20:18:09Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="available">2009-01-13T20:18:09Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="issued">2009-01-13T20:18:09Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="submitted">2008</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="uri">http://hdl.handle.net/10012/4176</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="abstract" lang="en">Current thermoplastic processing techniques involve high capital costs for moulds and&#xd;
significant use of energy to melt or soften the materials. Single-step process cold&#xd;
forming techniques, such as stretch forming, could be cost effective methods for&#xd;
manufacturing large parts with shallow cross-sections from plastic sheet. The present&#xd;
work is a preliminary investigation of a cold forming technique for polycarbonate.&#xd;
The objective of this work is to characterize the bulk deformation behaviour of&#xd;
polycarbonate using tensile tests and dome stretch forming tests. Two different&#xd;
molecular weight polycarbonate sheets with 1.6 mm thickness were studied: (i) one with&#xd;
Mw = 42,000 g/mol and (ii) the other with Mw = 52,000 g/mol. For the latter, 3.2 mm&#xd;
sheets were also studied.&#xd;
Tensile tests conducted at three different cross-head speeds, i.e., 2, 20 and 200 mm/min&#xd;
showed very similar elastic and plastic deformation properties for the two molecular&#xd;
weights. Correspondingly, the activation volumes at yield were almost identical. There&#xd;
was also negligible difference in the thermophysical properties between the two materials&#xd;
as found by differential scanning calorimetry.&#xd;
Dome stretch forming tests were conducted on a metal forming machine. Specimens of&#xd;
varying width were tested to give different strain states ranging from deep drawing to biaxial. The limiting dome height or the maximum level of stretch forming&#xd;
iv&#xd;
increases with specimen width. This is due to biaxial deformation which increases the&#xd;
maximum strain. Forming limit diagrams (FLDs) were also constructed from the local&#xd;
strains measured from printed fine circle grid patterns on the polycarbonate sheet&#xd;
surfaces. The FLDs showed common general characteristics with metals except for a few&#xd;
key differences. An area of very few data points was found to lie between the “safe&#xd;
zone” and the “necked zone”. This void was referred to as the “unstable neck formation&#xd;
zone”. It exists because of the large local increases in strain associated with the unstable&#xd;
nature of polymer neck formation.&#xd;
Much more study is required before polycarbonate can be cold formed at strains below&#xd;
the unstable neck deformation. However, the materials and techniques used in this work&#xd;
have demonstrated that the process can be viable for forming shallow large parts from&#xd;
relatively thin thermoplastic sheet a as long as the local biaxial strains are less than 20%.</dim:field>
   <dim:field mdschema="dc" element="language" qualifier="iso" lang="en">en</dim:field>
   <dim:field mdschema="dc" element="publisher" lang="en">University of Waterloo</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en">Polycarbonate</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en">Formability</dim:field>
   <dim:field mdschema="dc" element="subject" qualifier="program" lang="en">Mechanical Engineering</dim:field>
   <dim:field mdschema="dc" element="title" lang="en">Formability of Polycarbonate</dim:field>
   <dim:field mdschema="dc" element="type" lang="en">Master Thesis</dim:field>
   <dim:field mdschema="dc" element="pending" lang="en">false</dim:field>
   <dim:field mdschema="uws-etd" element="degree" qualifier="department" lang="en">Mechanical and Mechatronics Engineering</dim:field>
   <dim:field mdschema="uws-etd" element="degree" lang="en">Master of Applied Science</dim:field>
   <dim:field mdschema="uws" element="typeOfResource" lang="en">Text</dim:field>
   <dim:field mdschema="uws" element="peerReviewStatus" lang="en">Unreviewed</dim:field>
   <dim:field mdschema="uws" element="scholarLevel" lang="en">Graduate</dim:field>
   <dim:field mdschema="others" element="access-status">open.access</dim:field>
</dim:dim>
</metadata></record></GetRecord></OAI-PMH>