<?xml version="1.0" encoding="UTF-8"?><?xml-stylesheet type="text/xsl" href="static/style.xsl"?><OAI-PMH xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/ http://www.openarchives.org/OAI/2.0/OAI-PMH.xsd"><responseDate>2026-11-22T16:12:18Z</responseDate><request verb="GetRecord" identifier="oai:uwspace.uwaterloo.ca:10012/4694" metadataPrefix="dim">https://dspacemainprd01.lib.uwaterloo.ca/server/oai/request</request><GetRecord><record><header><identifier>oai:uwspace.uwaterloo.ca:10012/4694</identifier><datestamp>2017-03-21T18:27:44Z</datestamp><setSpec>com_10012_9900</setSpec><setSpec>com_10012_1</setSpec><setSpec>col_10012_9912</setSpec><setSpec>col_10012_6</setSpec></header><metadata><dim:dim xmlns:dim="http://www.dspace.org/xmlns/dspace/dim" xmlns:doc="http://www.lyncode.com/xoai" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.dspace.org/xmlns/dspace/dim http://www.dspace.org/schema/dim.xsd">
   <dim:field mdschema="dc" element="contributor" qualifier="author" authority="d2b0663c-e6ce-4d6e-84dc-389cbcc23961" confidence="600">Huang, Yan</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="accessioned">2009-09-03T20:06:19Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="available">2009-09-03T20:06:19Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="issued">2009-09-03T20:06:19Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="submitted">2009-06-01</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="uri">http://hdl.handle.net/10012/4694</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="abstract" lang="en">Microelectronic wire bonding is a manufacturing process used to electrically connect integrated&#xd;
circuits with circuit boards or other substrates. Conventionally, balls are molten at the end of a Au&#xd;
bonding wire and subsequently bonded on Al metallization of a integrated circuit. However,&#xd;
Pd/Ni metallization has recently been used for its improved mechanical properties.&#xd;
The bondability, bonding mechanism, and reliability of Au ball bonds on Pd are studied in this&#xd;
thesis. The substrates were produced in this project using three different materials. The base material&#xd;
is polished Cu in the shape of a coupon (1.0 cm × 1.0 cm × 0.5 mm). Cu coupons are plated&#xd;
with Ni (1.0 μm) using an electroless process, followed by electrolytic plating of a layer of Pd&#xd;
(0.3 μm), resulting in an arithmetic mean roughness of the surface of 0.08 μm (baseline sample,&#xd;
sample 0). Higher roughness values of 0.2, 0.4, and 0.5 μm are artificially produced by rolling&#xd;
(sample 1), sanding (sample 2), and sandblasting (sample 3), respectively, on the Cu surface&#xd;
before plating Ni and Pd.&#xd;
A 25 μm diameter Au wire is used for bonding on the polished and roughened substrates with a&#xd;
process temperature of T = 220 °C, and it was found that ≈ 4 % to ≈ 18 % less ultrasonic amplitude&#xd;
was required for successful bonding on the roughened substrates compared to the polished&#xd;
substrate. Bondability is measured by shear testing the ball bonds. An average ball bond strength&#xd;
achieved on the polished substrate is 130 MPa. This value is lower on the roughened substrate&#xd;
with the exception of the sandblasted substrate.&#xd;
Long-term thermal aging at 250 °C was performed with ball bonds on samples 0-3 for durations&#xd;
of ≈ 300 h. The reliability of the bonds is characterized by non-destructive contact resistance analysis&#xd;
during aging and destructive cross section analysis after aging. Contact resistance values for&#xd;
the ball bonds range from 1.6 to 3.5 mΩ at 20 °C before aging, and does not correlate with roughness.&#xd;
For the baseline sample, contact resistance of the ball bonds decreases during aging by -6 %&#xd;
(median value), which indicates electrical integrity of the interconnections at high temperature.&#xd;
This decrease possibly is due to interfacial gap filling by Au or Pd diffusion. In contrast, the contact&#xd;
resistance increases for the roughened samples 1-3 and changes are 0.4, 5, and 14 %, respectively&#xd;
(median values). A conclusive explanation for this increase has not yet been found. After&#xd;
250 h of aging, a TEM analysis showed Au to Pd diffusion in the baseline sample with a diffusion&#xd;
depth of ≈ 0.1 μm Au. No intermetallics, voids, or contamination is found on the interfaces after&#xd;
aging according to nanohardness, SEM, and TEM analyses. No bond lift-offs or electrical opens&#xd;
were found for the aging temperature and durations chosen. No conclusive evidence for the presence&#xd;
of Au-Pd intermetallics or voids is found.</dim:field>
   <dim:field mdschema="dc" element="language" qualifier="iso" lang="en">en</dim:field>
   <dim:field mdschema="dc" element="publisher" lang="en">University of Waterloo</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en">Ball Bonding</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en">Reliability</dim:field>
   <dim:field mdschema="dc" element="subject" qualifier="program" lang="en">Mechanical Engineering</dim:field>
   <dim:field mdschema="dc" element="title" lang="en">Study of Au Ball Bond Mechanism and Reliability on Pd/Ni/Cu Substrate</dim:field>
   <dim:field mdschema="dc" element="type" lang="en">Master Thesis</dim:field>
   <dim:field mdschema="dc" element="comment" qualifier="hidden" lang="en">thesis previously approved</dim:field>
   <dim:field mdschema="dc" element="pending" lang="en">false</dim:field>
   <dim:field mdschema="uws-etd" element="degree" qualifier="department" lang="en">Mechanical and Mechatronics Engineering</dim:field>
   <dim:field mdschema="uws-etd" element="degree" lang="en">Master of Applied Science</dim:field>
   <dim:field mdschema="uws" element="typeOfResource" lang="en">Text</dim:field>
   <dim:field mdschema="uws" element="peerReviewStatus" lang="en">Unreviewed</dim:field>
   <dim:field mdschema="uws" element="scholarLevel" lang="en">Graduate</dim:field>
   <dim:field mdschema="others" element="access-status">open.access</dim:field>
</dim:dim>
</metadata></record></GetRecord></OAI-PMH>